 |
| Oppo Mirror 3 Stock Firmware |
Download:
How to Flash with SP Flash Tools
Step One:
Download and install drivers for your device. If you can’t find your device driver, us this guide to download and install the driver.
Step Two:
Download Sp Flashtool and the your phone’s firmware package.
Step Three:
Extract Sp FlashTool and your firmware package to different folders
Step Four:
Open SP FlashTool folder and launch SP Flashtool.exe as Administrator
Step Five:
Click on Scatter-loading, browse and select scatter file from the folder you extracted the downloaded firmware. (e.g, MT6582_Android_scatter.txt)
Step Six:
Click on Download and connect the device to PC via USB cable. Device must be turned off, before attaching to pc.
Step Seven:
Once the device is connected to PC, a progress bar will start loading. Wait for it to complete. A green circle with Ok should popup to indicate completion.
Step Eight:
Disconnect the device and perform a factory reset before you power on fully.
Done.
If you still have questions, please ask in comments. Need your device stock firmware, request in comments too.